A 3W LED maintained emergency exit sign for marquees and temporary event structures. The V-TAC bulkhead fits with a 16-amp plug and connector at both ends for daisy-chaining along a marquee frame, and the internal Ni-Cd battery provides three hours of backup illumination if the mains power drops out - so your exit route stays lit even during a failure.
The unit is rated IP65, so it sits happily indoors or out in a marquee at a festival, a corporate event or a private party. It can be configured as single or double-faced depending on which directions need to see the sign, and the universal mounting bracket allows wall, side or ceiling fixing. In maintained mode the sign stays lit continuously; in non-maintained mode it only activates on power failure.
These are the lights that tick the licensing and safety boxes for marquee events - you need clear exit signage and backup illumination for any structure the public are in. Pair them with our LED Marquee Emergency Flood lights for backup area lighting along exit routes, and our 6ft IP65 LED strip lights for general marquee illumination.
Hit the green Get A Quote button to add exit lights to your booking and we will come back to you the same day. The £5 price is per sign, and we can advise on how many you need for your marquee layout to satisfy the event safety requirements.
Features
- 3W LED maintained emergency exit bulkhead - stays lit continuously, with battery backup on power failure
- Selectable maintained or non-maintained operation
- Efficient thermal management technology
- High-performance Ni-Cd batteries (3.6V, 1200mAh) for longevity and low maintenance
- 16 SMD LEDs mounted on printed circuit board
- Single or double-face configuration - choose depending on which directions need to see the sign
- Reliable emergency backup of 3 hours on full battery charge
- Universal mounting - wall, side or ceiling
- LED indicator light showing operational status
- Thermoplastic polycarbonate housing
Specification
- Model: V-TAC VT-533 (8437)
- LED: 3W, 16 x SMD LEDs
- Lumens: 140lm
- Colour temperature: 6400K (cool daylight)
- CRI: >80
- Beam angle: 120°
- Input power: AC 220-240V, 50/60Hz
- Power factor: >0.45
- Battery: Ni-Cd 3.6V, 1200mAh
- Charging current: 70-150mA
- Battery discharge current: 100-450mA
- Charging time: 24 hours to full charge
- Emergency operation time: 3 hours
- IP rating: IP65 - rainproof and dustproof
- Dimensions: 346 x 107 x 60mm
- Operating temperature: -20°C to +45°C
- Housing: thermoplastic polycarbonate, white finish
- Dimmable: no
- Warranty: 2 years (manufacturer)
- Cable: 16-amp plug and connector at both ends for daisy-chaining (DB-fitted)
Practical Details
- Price: £5 excluding VAT (£6.00 including VAT) per sign.
- Power: 220-240V, 3W draw per unit. Daisy-chainable via 16-amp connectors at both ends.
- Surfaces: suitable for indoor and outdoor use on artificial grass, hard surfaces, grass, concrete, hard standing, mixed surfaces or wood chip.
- Setup: delivery, installation and collection included. We mount the signs to your marquee frame in wall, side or ceiling orientation.
- Minimum spend: £50 for any delivered order plus delivery cost. Collection from our Rotherham warehouse is available instead, subject to a deposit and photo ID.
Suitable For
| Indoors on Artificial Grass |  |
| Indoors on Hard Surface | |
| Outdoors on Concrete | |
| Outdoors on Grass | |
| Outdoors on Grass / Hard Surface Mix | |
| Outdoors on Hard Surface | |
| Outdoors on Wood Chip | |