An all-in-one LED wash light with built-in laser effects, the Kam Disco Effect Light is a single box that fills a room with colour and moving stars. Hire one for a house party or DIY disco, rig a few up for a wedding reception, or use them as uplighters around a conference room wall - linked together in master/slave mode they will run the same program in sync.
Each unit pairs 18 super-bright 1W LEDs (red, green and blue with full colour mixing) with a 100mW red and 30mW green star cluster laser, so you get a wide colour wash and room-filling laser patterns from one fixture rather than two separate hires. Sound-to-light mode picks up the music and moves with it, auto mode runs the built-in programs on its own, and if you have a DMX controller the eight DMX channels give you proper control.
It runs off a standard 3-pin 230V socket at 25W, so there is no special power requirement and no generator needed. At 1.5kg and 255 x 90 x 220mm it is light enough to mount on the supplied bracket as a stand, rig or floor fixture, and one person can place a row of them in minutes.
This light sits in our PA and Music Section - pair it with the 15-inch Bluetooth PA Speaker for a complete DIY disco setup that runs from a single plug. For venue dressing and mood lighting rather than dancefloor effects, have a look at our Festoon Lighting.
Hit the green Get A Quote button to add this to your booking and we will come back to you the same day. Hire one unit or several - the £20.83 price is per light, and linking two or three together is where the effect really comes alive.
Features
- Spectacular multicolour wash FX plus star cluster lasers in a single fixture
- Ideal for DJs, gigs, weddings, parties and DIY discos
- Wide-angle lighting effects that cover the venue
- Room-filling red and green star cluster laser using 100mW red and 30mW green laser diodes
- Super-bright 18 x 1W LEDs producing vibrant colour washes in red, green and blue plus colour mixes
- Three operating modes: Auto, 8-channel DMX and Sound-to-Light
- Linkable master/slave operation so multiple units run the same program in sync
- Built-in programs with adjustable speeds
- Easy-to-use 4-button control with LED display panel
Specifications
- Adjustable metal mounting bracket - stand, rig or floor mount
- Power consumption: 25W
- Power supply: AC 220V-240V 50/60Hz via IEC mains input (standard 3-pin 230V plug)
- Dimensions (WxDxH): 255 x 90 x 220mm
- Weight: 1.5kg
- Laser class: Class 3R
Practical Details
- Price: £20.83 excluding VAT (£25 including VAT) per light. Overnight hire available for an extra £25.
- Power: one standard 3-pin 230V socket per unit, 25W draw. No generator required.
- Surfaces: suitable for indoor use on artificial grass or hard surfaces only. Not suitable for outdoor use on any surface.
- Setup: delivery, positioning and collection included. The adjustable bracket lets you stand, rig or floor-mount each unit.
- Minimum spend: £50 for any delivered order plus delivery cost. Collection from our Rotherham warehouse is available instead, subject to a deposit and photo ID.
Suitable For
| Indoors on Artificial Grass |  |
| Indoors on Hard Surface | |
Not Suitable For
| Outdoors on Concrete |  |
| Outdoors on Grass | |
| Outdoors on Grass / Hard Surface Mix | |
| Outdoors on Hard Surface | |
| Outdoors on Wood Chip | |